POCKET DOOR HARDWARE
GIVE ANY ROOM MORE SPACE WITH JOHNSON POCKET DOOR HARDWARE conventional door pocket door

Where a "traditional" swinging door takes up valuable floor and wall space, the Johnson Pocket Door System literally "fits right in" to solve room planning problems. 

Johnson's Pocket Door Hardware systems are designed to offer maximum space saving characteristics for a multitude of applications. Pocket Doors are particularly well suited for dining rooms, master bathrooms, wardrobes, kitchens or any floor space is at a premium. The use of a pocket door will free up previously unusable wall and floor space with a clean and modern appearance.

Visit the Johnson Hardware Website

Johnson pocket door hardware

 

 1500 POCKET DOOR FRAMES

MAX DOOR WEIGHT: 125 lbs.

FINISHED WALL THICKNESS: 4-9/16"

Easily assembled, structurally strong pocket door frame designed for fast installation in standard 2 x 4 timber or steel frame stud walls typically sheeted with drywall. Versatile frame can be adapted for use in thicker walls or cut down to accept any smaller size door. Removable aluminum track with low friction convex track rails, guaranteed jump proof smooth rolling tricycle hangers, rust resistant zinc plated steel reinforced timber split studs and self adjusting floor anchors.

L&W stocks both the 3068 & 3080 universal pocket door frames which can be cut down to accommodate smaller sizes.

1500 EXCEPTIONAL FEATURES

SELF ADJUSTING FLOOR ANCHORS

Long vertical fingers slide into split studs - allowing for floor settling without disturbing horizontal alignment of header and track. Anchors can be nailed, screwed or cemented to floor.

STEEL WRAPPED UPRIGHT STUDS

Split jamb and studs uprights have full zinc plated steel sides and backs to give maximum rigidity for wall material and to restrict accidental nail penetration. Slots on split stud edges allow easy nailing of jamb stock.

REMOVABLE TRACK

Track has keyhole attaching point slots allowing easy removal without tearing out walls. Box design prevents rollers from jumping track. Heavy walled aluminum track is precision extruded for smooth operation. Convex rail track design provides single point hanger wheel contact for low roll resistance and dust traps on both sides of rails allow hangers to operate freely when dust builds up.

TRICYCLE HANGERS

Unique three wheel design ensures all wheels carry door weight equally. Smooth rolling balanced wheels offer minimum friction riding on convex track rails. "Flip-of-a-clip" separates wheels from hanger plate for easy door installation/removal. Standard 1120 hangers are tested for doors weighing up to 125 lbs. [57 kg.] and 1125 heavy-duty ball bearing hangers are tested for doors weighing up to 200 lbs. [91 kg.] each.

TESTED QUALITY

Johnson pocket door frames are the only pocket door frames INDEPENDENTLY tested to ANSI standards.

1500 HEADER ASSEMBLY DELIVERED WITH 100 TRACK PREINSTALLED

READY FOR QUICK INSTALLATION IN ROUGH OPENING

1500 FRAME LAYOUT

1500 SET COMPONENTS

100

ALUMINUM TRACK

UPRIGHT SET

WITH FLOOR ANCHOR

ASSEMBLED FRAME

 

1500_color_LD1.jpg (61524 bytes)

INSTALLED FRAME

 

100.jpg (7495 bytes)

TRACK SIZE

1120 DIM

STANDARD HANGER

1125 DIM

BALL BEARING HANGER

SIDE VIEW

1513 DIM

DOOR STOP

1550 DIM

DOOR GUIDE

1712 DIM

ADJUSTMENT WRENCH

INSTALLATION HARDWARE




ALL 1500 SERIES FRAMES FIT IN STANDARD 2 X 4 STUD WALLS

OPTIONAL 1125 BALL BEARING HANGER SET AVAILABLE FOR 200 lbs. [91 kg.] DOORS

OPTIONAL 1575 ADAPTOR KIT AVAILABLE FOR 1-3/4" [44mm] DOOR INSTALLATIONS

*UNIVERSAL HEADER FACTORY MARKED FOR CUTTING DOWN TO STANDARD DOOR WIDTHS

ALL 1500 FRAMES CAN BE CUT DOWN TO ACCOMMODATE ANY SMALLER SIZE DOOR (HEIGHT & WIDTH)

ROUGH OPENING WIDTH: SINGLE 2 X DOOR WIDTH + 1" [25mm] | CONVERGING 4 X DOOR WIDTH

ROUGH OPENING HEIGHT: DOOR HEIGHT + 4-1/2" [114mm]

1555

CONVERGING DOOR KIT